CLAMP 3 TONNE SHIPBUILDING 9.44-12.56 JA
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
CLAMP 3 TONNE SHIPBUILDING 9.44-12.56 JA
$1,328.00
IPBTO10 - 3t Shipbldg. Clamp for Bulbprofiles HP 9.44-12.56" Jaw
• The IPBTO10 shipbuilding clamp is used as a temporary tackle eye in spaces which have been reinforced with HP (bulb) profiles such as engine rooms and shipsections. This clamp is fitted with a screwed spindle for easy attachment of the clamp. The moment a load is applied, the clamp is automatically fixed.
• Alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available. • Design Factor based on EN 13155 and ASME B30.20.
- BrandCrosby
- Maximum Jaw Width12.56
- Minimum Jaw Width9.44
Description
IPBTO10 - 3t Shipbldg. Clamp for Bulbprofiles HP 9.44-12.56" Jaw
• The IPBTO10 shipbuilding clamp is used as a temporary tackle eye in spaces which have been reinforced with HP (bulb) profiles such as engine rooms and shipsections. This clamp is fitted with a screwed spindle for easy attachment of the clamp. The moment a load is applied, the clamp is automatically fixed.
• Alloy steel body for strength and smaller size. Forged alloy components, where required.
• Individually Proof Tested to 2 times the Working Load Limit with certification.
• Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
• Maintenance and repair kits are available.
• Design Factor based on EN 13155 and ASME B30.20.