SLEEVE 1 DUPLEX NON TAPERED STEEL
Please note: images may not be exact representations. Always refer to manufacturer's specifications.
SLEEVE 1 DUPLEX NON TAPERED STEEL
$50.40
For turnback wire rope splicing. Special processed low carbon steel. Turnback terminations have efficiency ratings of 94% based on the catalog strength of wire rope. COLD TUFF for better swageability and low temperature toughness. S-506 Sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), RRL, FC or IWRC wire rope. Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured. Resists cracking when swaged (equals or exceeds stainless steel sleeves). Stamp for identification after swaging without concern for fractures (as per directions in the Wire Rope End Termination Users Manual).
- BrandCrosby
- Cable Size1"
- Sleeve O.D. After Swage2.05"
Description
For turnback wire rope splicing. Special processed low carbon steel. Turnback terminations have efficiency ratings of 94% based on the catalog strength of wire rope. COLD TUFF for better swageability and low temperature toughness. S-506 Sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), RRL, FC or IWRC wire rope. Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured. Resists cracking when swaged (equals or exceeds stainless steel sleeves). Stamp for identification after swaging without concern for fractures (as per directions in the Wire Rope End Termination Users Manual).